Projects: Difference between revisions
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
===[[IVSM|Current/Voltage Sense Module]]=== | ===[[IVSM|Current/Voltage Sense Module]]=== | ||
This is a 2-channel current + voltage 4-wire sense module for recording low to medium voltage/currents at 16-bit resolution. | This is a 2-channel current + voltage 4-wire sense module for recording low to medium voltage/currents at 16-bit resolution. | ||
'''Status: Complete''' | |||
===[[USBSerial|CH340 Based USB to Serial Adapter Board]]=== | |||
This is a USB to serial adapter board with seperately selectable power and IO voltages, supporting 500mA output current for power (with PTC protection on USB side and power output side), input/output buffered and protected. | |||
'''Status: Complete''' | '''Status: Complete''' |
Revision as of 00:15, 20 March 2019
Planned Projects
This is a list of all planned projects for senior project/masters thesis/fun projects/pie-in-the-sky.
Status: Ongoing
Current/Voltage Sense Module
This is a 2-channel current + voltage 4-wire sense module for recording low to medium voltage/currents at 16-bit resolution.
Status: Complete
CH340 Based USB to Serial Adapter Board
This is a USB to serial adapter board with seperately selectable power and IO voltages, supporting 500mA output current for power (with PTC protection on USB side and power output side), input/output buffered and protected.
Status: Complete
Solar Battery Charger
This is a solar charger for supplying power to mobile devices via USB port.
Status: Complete
Roborodentia 2011
This is a project to create a fully autonomous robot capable of collecting and scoring ping pong balls into an opponent's net.
Status: Complete
Quadrifilar Helix
This is a project to create a UHF quadrifilar helix (QFH) antenna for use as an APRS transmit antenna for the high altitude balloon project.
Status: Complete
rev0Trac
This is a project to create an APRS tracking beacon to transmit GPS coordinates and other data via radio.
Status: In Progress
rev0Trac UTx
This is a project to create an APRS all-in-one UHF transceiver, building on the capability of the rev0Trac VTx.
Status: In Progress
Breakout Boards and Misc. Projects
This is a list of small projects such as breakout boards for various chips that have been made.
Status: Ongoing
EE 306 Sustainability Analysis
This is the sustainability analysis project for EE 306 -- Semiconductor Device Electronics, for Fall 2010.
Status: Complete
EE 460 Reverse Engineering
This is the reverse engineering team project for EE 460 -- Senior Project Preparation, for Fall 2011.
Status: Complete
Puxing PX-2R Teardown
This is a full teardown and disassembly of the Puxing PX-2R 70cm Handheld Transceiver, including pictures of the main PCB and parts list.
Status: In Progress
Dorji DRA808M Teardown
This is a teardown and analysis of the Dorji DRA808M 1W 400-470 MHz FM radio module.
Status: In Progress
IEEE Student Branch - High Altitude Balloon Project
This is a project to send a helium weather balloon into near-space (80,000-100,000 feet) and report back various sensor measurements, including pressure, temperature, GPS coordinates, altitude, and others, in real time.
Status: In Progress
IEEE Student Branch - Laser Projector Project
This is a project to build a monochrome, 640x480, 30 fps laser projector that will interface with a computer and display images and video in real time.
Status: In Progress
LaserScan
This is a project to build a 24-bit color laser projector that can interface to a computer to display video or pictures in real time.
Status: On hold until green diode source is obtained
Versadrive
This is a 1 amp, 3 mode constant current laser boost driver, featuring a user-selectable software interlock and battery indicator.
Status: Abandoned
445nm 1W Laser
This is a 1 watt 445nm laser in a stainless steel 18650 host.
Status: Complete
GC-D 100
This is a project to build a fully functional digital Geiger counter.
Status: Complete
Consilium
This is a bot for the Cal Poly Robotics Club inter-club competition for 2010.
Status: Complete
Laser Drivers
This is a list of several common laser driver types.
Status: Under Construction
Lasers
This is a list of all lasers currently owned or being created.
Status: Ongoing
FPV
This is a description of my FPV tricopter and associated equipment.
Status: Ongoing
CNC
This is an overview of my experience and capabilities with CNC milling.
Status: Ongoing
Xray
This is an overview of my adventure in Xray photography.
Status: Ongoing
Spectrum Analyzer
This is an overview of the various modules and end result of a homemade 30MHz-2.5GHz spectrum analyzer.
Status: Ongoing
3D Printing
This is an overview of my adventures in 3D printing.
Status: Ongoing