Skip to content
Rev0 Wiki archive

CNC

Last edited

This page describes my capabilities and lessons learned with CNC machining. My first CNC machine is the MyDIYCNC machine, found here: http://www.mydiycnc.com/complete_kit and was built from the complete kit. The machine was upgraded with a more powerful spindle (300W DC), and corresponding stronger Z axis sled. The X-axis base was modified to increase travel range to 11.6", with a final total X/Y range of 11.6 x 4.2". I have since purchased a Harbor Freight Mill (#44991), aka Sieg X2 clone, which should be capable of machining aluminum. This page will also serve as a cost breakdown of all components needed for the complete systems.

Subsystems

MyDIYCNC System Cost

PartQuantityUnit CostTotal CostSource
MyDIYCNC Complete Kit1$528.91$528.91MyDIYCNC
PCI-e 1x to Parallel Card (Rosewill RC-302E)1$24.43$24.43Newegg
Motor Speed Controller1$7.79$7.79eBay
300W DC Spindle1$81.89$81.89eBay
48V 360W DC Power Supply1$26.00$26.00eBay
Total Cost$669.02(as of 11/12/15)