Skip to content
Rev0 Wiki archive

445nm 1W

Last edited

Contents
  1. Project Status and Updates
  2. Videos
  3. Project Cost Breakdown
The final 1W 445nm laser in operation.
Initial whiteboard plan for the laser using a Dorcy host.
Autodesk Inventor model of the Dorcy host.
Current overshoot measured on the Versadrive prototype board. It measures at 240mA (37.5% of full value) for 70uS.
Current ripple of the Versadrive prototype measures at 92mA max (14.4% of full value).

This is a project to create a 1 watt 445nm laser, using a diode from a Casio XJ-A140 projector in an Aurora 18650 host.

Project Status and Updates

  • 6.21.2010
    • Initial plan drawn up on whiteboard
    • Dorcy main body segment modeled in Autodesk Inventor
  • 6.23.2010
    • Dorcy flashlight button segment modeled in Autodesk Inventor
    • Dorcy flashlight assembly created in Autodesk Inventor
  • 7.6.2010
    • Class 4 warning sticker made and ordered from Zazzle
  • 7.8.2010
    • Plan changed, decided to use a much smaller 18650 host
    • Initial plan for new driver started
    • ATtiny24 selected as controlling MCU, for size and I/O requirements
  • 7.9.2010
    • PCB for driver started, found feasible
    • Design for driver started in WEBENCH online tools using LM3410
    • Multiple power modes tested using Op-Amp MOSFET driver
  • 7.11.2010
    • Schematics and part selection complete, PCB routing begun
  • 7.14.2010
  • 7.17.2010
    • Prototype PCB routed, coding begun
  • 7.23.2010
    • LM3410 samples received
    • Prototype built using sample IC, SB350 diode, 1.5uH inductor (pulled from Dell motherboard), and 9.5/18uF ceramic capacitors
    • Limited testing done at operating point of ~600mA output and ~4V battery voltage, LM3410 IC dissipates significant power, output appears to be clean with minimal overshoot during startup and no inductive spike at shutdown.
  • 7.25.2010
    • Testing done at ~300mA with probe set to 10x, ringing and current ripple around 50-80% of full scale
    • Versadrive project abandoned due to poor/unsafe performance
    • Micro BoostDrive ordered
  • 7.31.2010
    • Aixiz module and Micro BoostDrive received
    • Laser assembled, initial testing done, on-hand batteries found insufficient at drive current of 1200mA
    • AW 18650 battery ordered from Lighthound
  • 8.7.2010
    • Heatsink cut to size and attached to Micro BoostDrive to prevent overheating, found semi-effective
  • 8.11.2010
    • Micro FlexDrive v5 ordered to provide greater current output
  • 8.12.2010
    • Micro FlexDrive v5 order cancelled due to no stock
  • 1.7.2011
    • Power decreased on Micro BoostDrive to reduce heat, continuous runtime increased to ~1 minute, 29 seconds, still capable of igniting cardboard

Videos

<HTML5video type="youtube" width="400" height="300" autoplay="false">nkSeNWYN5u8</HTML5video>

Project Cost Breakdown

ComponentCostSourceStatus
445nm1W XJ-A140 Diode$38.50Group Buy - kiyoukanAlive, in use
Aurora SH-032 18650 Host$21.62DealextremeIn use
Aixiz Module$3.39HighTechDealzIn use
Custom Copper Heatsink for Aurora Host$40.00jayrobIn use
Aixiz 445nm Glass Lens$11.00jayrobIn use
AW 2600mAh 18650 Protected Li-Ion Battery$18.78LighthoundIn use
Micro BoostDrive$26.00Micro BoostDriveAlive, in use
Total Price$159.29Price final