SA BPF1
Jump to navigation
Jump to search
This page describes the 1st IF Filter for the DIY Spectrum Analyzer.
Summary
The 1st IF Filter is a modified coupled-line microstrip filter. The first mixer upconverts the input of 30MHz-2.5GHz to a fixed 3.5GHz IF via the 1st LO of 3.53-6GHz. The first IF filter must reject the 2nd image of 1.94GHz, and RF feedthrough at 30MHz-2.5GHz.
Testing
- 8.x.2013: ...
Frequency (MHz) | Power (dBm) |
150 | -0.06 |
200 | -0.02 |
250 | -0.03 |
300 | -0.07 |
350 | -0.06 |
400 | 0.03 |
450 | 0.04 |
500 | 0.02 |
550 | -0.07 |
600 | -0.07 |
650 | 0.05 |
700 | 0.09 |
750 | -0.05 |
800 | -0.03 |
850 | 0.02 |
900 | 0.00 |
950 | -0.07 |
1000 | -0.10 |
1500 | -0.17 |
2000 | 0.21 |
2500 | 0.04 |
3000 | 0.62 |
3500 | 1.72 |
4000 | 1.47 |
Revisions
- 1.0: Initial revision.
PCB/Construction Photos
- Rev0VTx VCO PCB Bottom.jpg
Bottom of unpopulated PCB
- Rev0VTx VCO PCB Top.jpg
Top of unpopulated PCB
- Rev0VTx VCO Top.jpg
Populated PCB