Skip to content
Rev0 Wiki archive

SA BPF1

Last edited

Contents
  1. Summary
  2. Testing
  3. Revisions
  4. PCB/Construction Photos

This page describes the 1st IF Filter for the DIY Spectrum Analyzer.

Summary

Schematic for the rev0VTx VCO.
Board for the rev0VTx VCO.

The 1st IF Filter is a modified coupled-line microstrip filter. The first mixer upconverts the input of 30MHz-2.5GHz to a fixed 3.5GHz IF via the 1st LO of 3.53-6GHz. The first IF filter must reject the 2nd image of 1.94GHz, and RF feedthrough at 30MHz-2.5GHz.

Testing

  • 8.x.2013: ...


Frequency (MHz)Power (dBm)
150-0.06
200-0.02
250-0.03
300-0.07
350-0.06
4000.03
4500.04
5000.02
550-0.07
600-0.07
6500.05
7000.09
750-0.05
800-0.03
8500.02
9000.00
950-0.07
1000-0.10
1500-0.17
20000.21
25000.04
30000.62
35001.72
40001.47

Revisions

  • 1.0: Initial revision.

PCB/Construction Photos