CNC: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
Line 4: | Line 4: | ||
<gallery widths=180px heights=120px perrow=4> | <gallery widths=180px heights=120px perrow=4> | ||
File:Heeks_final_toolpath.png|[[Tricopter_Base_Plate|Tutorial: Tricopter Base Plate]] | File:Heeks_final_toolpath.png|[[Tricopter_Base_Plate|Tutorial: Tricopter Base Plate]] | ||
File:Heeks_final_toolpath.png|[[X2_Mill|Harbor Freight Mini Mill]] | |||
</gallery> | </gallery> | ||
Revision as of 05:39, 5 December 2015
This page describes my capabilities and lessons learned with CNC machining. My first CNC machine is the MyDIYCNC machine, found here: http://www.mydiycnc.com/complete_kit and was built from the complete kit. The machine was upgraded with a more powerful spindle (300W DC), and corresponding stronger Z axis sled. I have since purchased a Harbor Freight Mill (#44991), aka Sieg X2 clone, which should be capable of machining aluminum. This page will also serve as a cost breakdown of all components needed for the complete systems.
Subsystems
MyDIYCNC System Cost
Part | Quantity | Unit Cost | Total Cost | Source |
MyDIYCNC Complete Kit | 1 | $528.91 | $528.91 | MyDIYCNC |
PCI-e 1x to Parallel Card (Rosewill RC-302E) | 1 | $24.43 | $24.43 | Newegg |
Motor Speed Controller | 1 | $7.79 | $7.79 | eBay |
300W DC Spindle | 1 | $81.89 | $81.89 | eBay |
48V 360W DC Power Supply | 1 | $26.00 | $26.00 | eBay |
Total Cost | $669.02 | (as of 11/12/15) |
X2 Mill System Cost
Part | Quantity | Unit Cost | Total Cost | Source |
Harbor Freight Mill #44991 | 1 | $587.45 | $587.45 | Harbor Freight Tools |
12" Digital Readout | 2 | $31.54 | $63.08 | eBay |
6" Digital Readout | 1 | $28.29 | $28.29 | eBay |
3" Screwless Vise | 1 | $59.95 | $59.95 | Little Machine Shop |
Edge Finder | 1 | $7.50 | $7.50 | Little Machine Shop |
3/8" R8 Collet | 1 | $6.95 | $6.95 | Little Machine Shop |
R8 1 Piece Drawbar | 1 | $9.95 | $9.95 | Little Machine Shop |
Shipping/Handling/Tax | 1 | $13.38 | $13.38 | Little Machine Shop |
58 Piece Clamping Kit 7/16" | 1 | $48.05 | $48.05 | Amazon |
Dial Test Indicator | 1 | $30.51 | $30.51 | Amazon |
1/2" R8 Collet | 1 | $7.59 | $7.59 | Enco |
2 Flute HSS End Mills: 1/4", 5/16", 7/16", 3/8", 1/2" | 1 | $53.41 | $53.41 | Enco |
HSS/Cobalt Screw Machine Drills: 5/32", 1/4", 3/8", 1/2" | 1 | $20.55 | $20.55 | eBay |
M6x1 HSS Spiral Flute Tap | 1 | $10.04 | $10.04 | Amazon |
Tap Wrench | 1 | $8.77 | $8.77 | Amazon |
#4 (0.209") HSS Drill | 1 | $2.09 | $2.09 | eBay |
M6 Washer x50 | 1 | $4.88 | $4.88 | eBay |
M6 Hex Cap Screw x20 | 1 | $9.22 | $9.22 | eBay |
Aluminum Lubricant | 1 | $13.94 | $13.94 | Amazon |
White Lithium Grease | 1 | $4.46 | $4.46 | O'Reilly Auto Parts |
Mobil One 10W-30 Synthetic Oil | 1 | $7.84 | $7.84 | O'Reilly Auto Parts |
Magnetic Base for Test Indicator | 1 | $18.43 | $18.43 | Amazon |
Wood Spacer for Mill Base (0.75" x 2.5" x 16") | 2 | $1.05 | $2.10 | Home Depot |
"Hardware for Mounting Mill to Bench (3/4"" x 5 1/2"" Bolts, Fender Washers, Washers, Nuts)" | 4 | $1.46 | $5.84 | Home Depot |
Odorless Mineral Spirits | 1 | $6.83 | $6.83 | Home Depot |
Polyurethane for Wood Spacer | 1 | $8.32 | $8.32 | Home Depot |
Total Cost | $1039.42 | (as of 11/20/15) |