CNC: Difference between revisions
Jump to navigation
Jump to search
(Created page with "This page describes my capabilities and lessons learned with CNC machining. My CNC machine is the MyDIYCNC machine, found here: http://www.mydiycnc.com/complete_kit and is bui...") |
No edit summary |
||
| Line 3: | Line 3: | ||
==Subsystems== | ==Subsystems== | ||
<gallery widths=180px heights=120px perrow=4> | <gallery widths=180px heights=120px perrow=4> | ||
File: | File:Heeks_final_toolpath.png|[[Tricopter_Base_Plate|Tutorial: Tricopter Base Plate]] | ||
</gallery> | </gallery> | ||
Revision as of 22:18, 7 August 2015
This page describes my capabilities and lessons learned with CNC machining. My CNC machine is the MyDIYCNC machine, found here: http://www.mydiycnc.com/complete_kit and is built from the complete kit. This page will also serve as a cost breakdown of all components needed for the complete system.
Subsystems
System Cost
| Part | Quantity | Unit Cost | Total Cost | Source |
| MyDIYCNC Complete Kit | 1 | $528.91 | $528.91 | MyDIYCNC |
| PCI-e 1x to Parallel Card (Rosewill RC-302E) | 1 | $24.43 | $24.43 | Newegg |
| Total Cost | $553.34 | (as of 6/??/12) |