Mikrotik LTE: Difference between revisions
Jump to navigation
Jump to search
Line 16: | Line 16: | ||
====AT Command Sequence for Mikrotik Operation==== | ====AT Command Sequence for Mikrotik Operation==== | ||
'''Factory Reset:''' | '''Factory Reset:''' | ||
AT&F | AT&F | ||
AT&F0 | AT&F0 | ||
AT+CFUN=1,1 | AT+CFUN=1,1 | ||
'''Set USB mode to MBIM:''' | '''Set USB mode to MBIM:''' | ||
AT+QCFG="usbnet",2 | AT+QCFG="usbnet",2 | ||
'''Disable USB3.0 for RBM33G mPCIe port 1 (remove Jumper next to USB3.0 port also):''' | '''Disable USB3.0 for RBM33G mPCIe port 1 (remove Jumper next to USB3.0 port also):''' | ||
AT+QUSBCFG="SS",0 | AT+QUSBCFG="SS",0 |
Latest revision as of 06:04, 6 March 2022
Mikrotik R11e-LTE6
On RBM33G: More info Restarting modem every 2 minutes
Quectel EP06-A
ECM mode is the only one that works, another thread said flash to ros7 first then set to ecm then back to 6.48+: https://forum.mikrotik.com/viewtopic.php?f=3&t=150368#p787894
Mikrotik wiki on Quectel modems
AT Command Sequence for Mikrotik Operation
Factory Reset:
AT&F
AT&F0
AT+CFUN=1,1
Set USB mode to MBIM:
AT+QCFG="usbnet",2
Disable USB3.0 for RBM33G mPCIe port 1 (remove Jumper next to USB3.0 port also):
AT+QUSBCFG="SS",0